Remove Background Noise in Obs 2

Published on November 18, 2026

Remove Background Noise in Obs 2

Quick Answer

Yes, you can remove background noise in OBS, but the safest approach is to keep it simple. For most voices, use Noise Suppression first, choose RNNoise for the best default results, add an Expander if you want quieter room noise between phrases, and keep a Limiter last in the chain. OBS works best on mild, steady noise like fan sound, hum, hiss, or room tone. It is not the best fix for severe background noise, and aggressive suppression can make speech sound watery, metallic, or robotic. OBS says its Noise Suppression filter is intended for mild background noise and is generally not effective for large amounts of background noise. Source

If noise is still audible under your spoken words, or your voice starts sounding artificial before the noise is gone, that is usually the point to export the recording and clean it outside OBS. If you want a post-cleanup option, SimpleClean is another tool from our team.

  • Best default for most people: RNNoise
  • Best for lighter CPU use or older systems: Speex
  • Best for compatible RTX Windows setups: NVIDIA Audio Effects
  • Best tool for noise only in pauses: Expander
  • Use Noise Gate only when needed: for a firmer cut when you stop talking

In OBS, go to Audio Mixer > your mic source > Filters, then add Noise Suppression, Expander, Noise Gate, and Limiter. Source

Where the background-noise settings live in OBS

OBS keeps mic cleanup in the filter menu for each audio source. Open:

  1. Audio Mixer
  2. Find your Mic/Aux source or your named microphone source
  3. Click the gear or right-click the source
  4. Choose Filters
  5. Under Audio/Video Filters, click the + button
  6. Add the filters you need: Noise Suppression, Expander, Noise Gate, and Limiter

This is the same filter area shown in the official OBS overview and filters guide. Overview | Filters guide

What each OBS filter actually does

A lot of bad-sounding OBS audio comes from using the right filter for the wrong job. Here is the practical difference:

FilterWhat it helps withWhat it does not do wellBest use
Noise SuppressionMild steady noise during speech, such as fan noise, hiss, hum, or room toneSevere noise, loud rooms, or perfect removal of keyboard clicks during speechFirst filter for most mic cleanup
ExpanderReducing low-level room noise when you are quiet or between phrasesTrue denoising under active speechSmoother alternative to a hard gate
Noise GateMuting the mic when you are not talkingNoise that is still present while you speakUseful only when you need a firmer on/off effect
LimiterPreventing peaks and overloadsNoise removalLast filter in the chain

The big distinction is this: a gate is not denoise. If your keyboard, PC fan, or room noise is still audible while you are talking, a Noise Gate cannot truly fix that because the mic is already open. That is where Noise Suppression helps, within its limits. Noise Suppression | Noise Gate | Expander

The safest filter chain for voice in OBS

If your goal is cleaner voice without robotic artifacts, start with the smallest chain that can solve the problem:

  1. Noise Suppression
  2. Expander or Noise Gate if needed
  3. Any other dynamics or gain you already rely on
  4. Limiter last

This order follows official OBS guidance: the Expander documentation recommends putting the Expander after Noise Suppression, and the Limiter documentation says the Limiter should always be the final filter in the chain. Expander source | Limiter source

For most spoken-word recording, streaming, and screen capture, an Expander is the safer second step than a Noise Gate because it reduces quieter noise more gradually instead of snapping the mic fully open and closed.

RNNoise vs Speex vs NVIDIA Audio Effects

OBS supports multiple suppression methods, and the right one depends more on your system and use case than on hype. Source

MethodBest forMain tradeoff
RNNoiseMost users who want the best built-in default for voiceCan sound metallic if pushed too hard or if the room is very noisy
SpeexLower CPU use or older systemsUsually less natural than RNNoise at stronger settings
NVIDIA Audio EffectsWindows users with compatible RTX hardware who want NVIDIA-based noise removal inside OBSRequires compatible setup and can create problems if stacked with other noise-canceling apps

Best for most people: RNNoise

RNNoise is the easiest starting point because it is designed for speech-focused noise suppression and usually gives the best balance for live OBS voice cleanup.

Best for lighter CPU use: Speex

Speex is still useful when you want a lighter option or are working on older hardware.

Best for compatible RTX setups: NVIDIA Audio Effects

If you are on Windows with supported NVIDIA hardware and the required components installed, NVIDIA Audio Effects can be another option inside OBS. NVIDIA publishes the hardware, driver, and redistributable requirements here: NVIDIA Broadcast resources.

Important: avoid overlapping noise-canceling effects across apps on the same mic unless you have tested them carefully. Double-processing is a common cause of artificial voice texture.

Where did NVIDIA Noise Removal go in OBS?

If you used OBS before and cannot find NVIDIA Noise Removal inside the Noise Suppression filter, you are not imagining it. In OBS 31.0, released March 28, 2025, NVIDIA Audio Effects were split out from Noise Suppression into a separate filter, and existing filters were migrated. So on newer OBS versions, look for a separate NVIDIA-related filter instead of expecting it to appear as a mode inside Noise Suppression. Source

This version change matters because many older tutorials are now visually outdated.

How to remove background noise in OBS step by step

1. Identify the type of noise first

Before touching filters, listen to a short untreated sample. You are trying to separate three different problems:

  • Steady noise: fan sound, AC, hum, hiss, room tone
  • Noise in pauses: PC noise, room ambience, chair movement between phrases
  • Sharp intermittent noise: keyboard clicks, desk bumps, mouse clicks

This matters because Noise Suppression, Expander, and Noise Gate solve different parts of the problem.

2. Add Noise Suppression first

In your mic source filters, add Noise Suppression and start with RNNoise. Do a short voice test using your normal speaking volume. If the steady background sound drops and your voice still sounds natural, stop there for now.

3. Add an Expander if the room is still too present in pauses

If the mic still feels too open between words, add an Expander after Noise Suppression. This is usually the smoothest way to make the room fade back when you stop talking without the hard cutoff effect of a gate. Source

4. Use a Noise Gate only if you need a firmer cutoff

If you still want the mic to close more decisively when you are not speaking, try a Noise Gate. The risk is that a gate can clip quiet word beginnings or endings if the thresholds are too aggressive. Source

5. Put a Limiter last

Add a Limiter at the end of the chain so sudden loud peaks do not overload your output. Source

6. Monitor the full chain with real speech

Do not judge filters on silence alone. Read a few normal sentences, then listen for:

  • Metallic or watery consonants
  • Breathing or pumping room tone
  • Word beginnings getting chopped off
  • Keyboard clicks still leaking through while you speak

If that starts happening, back off. More filtering is not always better.

Expander vs Noise Gate: which should you use?

For most voice users in OBS:

  • Use an Expander if you want the mic to sound more natural while reducing room noise between phrases.
  • Use a Noise Gate if you specifically want the mic to shut off more firmly when you stop talking.

The official OBS Expander documentation describes it as similar to a gate but with less aggressive reduction, which is why it often sounds smoother for streaming, tutorials, and spoken content. Source

Can OBS remove keyboard clicks?

Sometimes, partly. OBS can reduce some keyboard noise, especially if it is mostly heard between phrases and your Expander or Noise Gate closes the mic. But if keyboard clicks happen while you are talking, they are much harder to remove cleanly in real time. Noise Suppression may reduce them a bit, but if you push it too far, your voice usually suffers first.

That is one of the clearest signs that live OBS cleanup has reached its limit.

Why OBS can make your mic sound robotic

If your voice starts sounding robotic after suppression, the cause is usually one of these:

  • The suppression is working too hard for the amount of noise in the room
  • You are trying to remove severe noise live, which OBS does not claim to handle well
  • You stacked multiple noise-canceling tools on the same mic source
  • A gate or expander is too aggressive, causing choppy transitions around speech

The fix is usually not “add more filters.” It is usually one of these:

  • Switch back to a lighter suppression method
  • Use fewer filters
  • Replace a Noise Gate with an Expander
  • Accept light live cleanup in OBS, then export for stronger post cleanup

Troubleshooting: common OBS noise-removal problems

No audible change

  • Confirm you added the filter to the correct mic source
  • Test with normal speech, not silence only
  • Try RNNoise if you started with Speex

Word beginnings get clipped

  • Your Noise Gate is likely too aggressive
  • Try an Expander instead
  • Reduce how strongly the mic closes between phrases

Keyboard still leaks during speech

  • That is a limitation of live suppression, not just a bad setting
  • Noise Gate will not solve clicks that happen while the mic is open
  • Use lighter live cleanup and plan on post cleanup if the recording matters

Voice sounds metallic or watery

  • Back off suppression strength
  • Use a shorter filter chain
  • Avoid overlapping NVIDIA and OBS noise-canceling effects on the same source

NVIDIA option is missing

  • Check your OBS version, because OBS 31 moved NVIDIA Audio Effects into a separate filter
  • Verify your hardware, drivers, and NVIDIA redistributable requirements

When to stop using OBS filters and clean the recording outside OBS

OBS is best when you need light live suppression. It is not the ideal rescue tool when:

  • Noise is still audible under the words
  • Your room is genuinely loud
  • Keyboard clicks are baked into the speech
  • Your voice turns metallic before the noise is gone

That is the point where it usually makes more sense to keep OBS conservative, record the cleanest version you can, and then clean the recording afterward. If you want a post-processing option, SimpleClean is another tool from our team.

If your main problem is doubled room sound rather than noise, this related guide on how to remove echo in OBS may be the better fix. And if you are comparing OBS’s built-in approach with another live option, our breakdown of OBS Noise Suppression vs Krisp can help.

Best setup by use case

  • Streamer in a fairly quiet room: RNNoise + Expander + Limiter
  • Older PC or lighter system load: Speex + Expander + Limiter
  • RTX Windows setup: NVIDIA Audio Effects, then only minimal extra filtering if needed
  • Course creator or YouTuber recording for upload: Light OBS suppression only, then external cleanup if noise remains during speech

Bottom line

The best way to remove background noise in OBS without making your mic sound robotic is to use the smallest filter chain that solves the actual problem. Start with Noise Suppression, usually RNNoise. Add an Expander if the mic stays too open in pauses. Use a Noise Gate only when you need a harder cutoff. Keep the Limiter last. And if the noise is still living underneath your speech, stop pushing live filters and finish the job after export.

Ready to Remove Background Noise?

Upload a file and hear the improvement in minutes.
Join thousands of creators using SimpleClean.